In a wet hose hoist, where should the clove hitch be tied relative to the coupling and nozzle?

• A. About 1 foot below coupling and nozzle
• B. Right at the coupling
• C. 3 feet above the nozzle
• D. On the bale

Answer: (A)

In a wet hose hoist, you want the clove hitch positioned where it can grip the hose securely without interfering with the coupling, nozzle, or the hose’s ability to run freely as it’s lifted. Tying the hitch about a foot below the coupling and nozzle gives you a solid gripping point on a smooth section of hose, away from the metal threads and potential snag points of the coupling. This placement protects the coupling and nozzle from wear and reduces the chance the rope will snag or kink as you hoist, while still allowing the hose to slide and fold properly as the lift progresses.

If the hitch were tied right at the coupling, it could press against the threads and create wear or binding, complicating the connection and movement. If it were placed too far toward the nozzle (three feet above the nozzle), the rope could interfere with the nozzle’s operation or bend the hose awkwardly during the lift. If it were tied on the bale, the knot wouldn’t provide the intended grip on the hose itself, making the hoist unstable.